Imagine you plug in your phone to charge only to find that something’s not just adding up! Either your phone is not charging properly or fails to charge at all. In most cases of an Android or iPhone not charging, the problem lies not in the charger or battery, but in the charging port itself. Over time, dust, lint, and other debris can easily build up inside the charging port. And, this can result in poor or no connection. Let’s check out how to clean a phone charging port and get it back to work.

Why is Your Android Device or iPhone Not Charging?

Often, users blame the charger when they find their iPhone not charging. Sometimes, the iPhone charger not working can be a real thing. However, you may ignore how dirty the charging port is.

Dust, lint, sand, and dirt can accumulate inside the charging port and block the metal connectors. Now, this can prevent a solid connection between your charger and phone. As a result, you might notice your phone to be charging intermittently or not at all.

The charging port is the contact point between your phone’s battery and the charger. The following instances can occur if you try to charge the device when its port is dirty.

• The phone might start charging but then stop. Your phone may only charge when the cable is in a specific position.
• Even though your phone charges, it can be slower than usual.
• If the connection is completely blocked then your phone won’t charge at all.

If you encounter any of these signs, it’s probably time to clean a phone charging port.

Things to Use and Avoid to Clean a Phone Charging Port

Before you proceed to clean a phone charging port, you must be aware of the tools that are safe to use. Additionally, you should refrain from using some specific tools while cleaning the charging port.

Here are the cleaning tools that are safe to use:

• Soft-bristled brushes (especially, those which are dedicated to such type of gadget cleaning).
• Cotton swabs.
• Wooden or plastic toothpicks.
• Compressed air canister.
• Microfibre cloth.

However, you must know what you must avoid. After all, it’s tempting to gran anything to clean the charging port as soon as possible. Well, resist yourself from using the following tools:

• Metal objects such as pins, paperclips, etc.
• Sharp objects.
• Moisture or liquids.

Additionally, don’t blow wind from your mouth as this can harm the charging port instead of any good.

How to Clean a Phone Charging Port: A Step-by-Step Guide

Cleaning your phone’s charging port is quick and easy. Here are the steps you need to follow when you find out your iPhone not charging.

Turn Your Phone Off

First, power off your mobile phone. Thus, your device will be safe from any chance of short-circuits while cleaning the charging port.

Examine the Charging Port

Make sure it’s a dirty charging port that prevents effective charging, not a battery or adapter issue. Otherwise, you might need an iPhone battery replacement or a relevant service from mobile repair Dubai shops. 

So, take a flashlight to carefully inspect the inside of the charging port. Check if there’s a visible amount of debris or damage there. In case of significant damage, consider an iPhone service provider.

Use Compressed Air

The next task is to loosen out the dust and dirt from the charging port. And, compressed air can do it the best. So, hold a can of compressed air upright. Then, blow short bursts of air into the port from a few inches away.

Make sure you hold the phone with the port facing down. Thus, any loose debris will fall out easily.

Try with a Toothpick

Now, you can insert a toothpick into the charging port. However, be cautious that the toothpick doesn’t damage the charging port. Carefully dislodge dirt using the toothpick. Also, don’t push too hard as it can break. And, you might end up damaging the metal connectors inside the charging port.

Wipe Using a Microfibre Cloth

After the port’s inside is clean, you are not done yet. You can use a soft-bristled brush to clean the port from its edges. Also, you can use a microfibre cloth to wipe the outside of the port. This will remove any remaining dust or debris. 

Test Your Phone

Hopefully, that helps you clean a phone charging port. After cleaning, you should plug the charger in and check if the device charges properly. If it doesn’t charge then it can be an iPhone charger not working issue. You can replace the charger or consult an iPhone service to see if there’s underlying damage.

How to Get Rid of Sand from the Charging Port

Have you been to the beach recently? Then, sand can clog up the pins and cause charging issues. However, you can clean a phone charging port even if you have to deal with sand. Here’s what you can do.

Use Compressed Air

Start by blowing the sand out. So, take a can of compressed air and hold it at a slight angle. Then, blow the air gently into the port. By the way, you must keep the port facing downward. Unless the loose sand won’t fall out.

Brush it Away

To sweep any remaining sand particles, you can use a soft-bristled brush. Be gentle while using the brush. Too much pressure can bend the charging pins and hence, your phone’s longevity can be compromised.

Utilise a Toothpick

Sometimes, stubborn sand particles won’t come out even after using compressed air or brush. Then, you can take a toothpick to dislodge those particles. However, be extra careful not to scratch the inside of the charging port.

After cleaning the charging port, you can now test whether your phone charges now. Otherwise, you might have to visit a Mobile Repair Dubai shop to see if anything else prevents your device from charging properly.

How to Remove Water from the Phone’s Charging Port

‘Water is inside your charging port’ – does your iPhone show such a warning? Well, that can be a dangerous situation. That applies to Android devices as well. Indeed, it can induce short circuits and lead to further damage. 

Has your phone been exposed to water recently? And, now you discover your iPhone not charging. Then, you should check out how to dry the charging port safely.

Shut Down Your Phone

Immediately turn your phone off.

Use a Soft Cloth

Next, blot the charging port with a soft dry cloth. This should soak up any visible moisture. On the other hand, don’t insert the cloth inside the charging port as it can push the water further in.

Blow Compressed Air

Afterwards, use compressed air to blow out the remaining water. Simply, hold the can upright and keep the nozzle a few inches away from the charging port.

Pat the Phone to Dry

Now, you can gently shake the phone and pat it a few times to get the moisture out. You can leave your phone in a dry place. However, don’t place it under direct sunlight or inside a rice bag.

Tips to Keep the Charging Port Clean

Use a dust plug for times when you don’t charge the phone. Additionally, keep your hands clean while handling your device. If charging problems persist don’t hesitate to visit an iPhone repair in Dubai service center or mobile repair Dubai shop.